Rear sintered brake pads Gas Gas/Honda/Kawasaki/Suzuki/Yamaha Enduro Expert EE02088
Brake pads are important safety items and should be fitted only by authorized mechanic in accordance with the motorcycle manufacturer's instructions.
- Replace at minimum thickness of pad materials 1.5mm.
- Keep friction surfaces free from grease or other fluid contaminants witch will reduce brake efficienty.
- Clean and degrease the brake disc prior installation of new brake pads. Badly worn or grooved brake discs should be replaced.
- Operate the brakes few times in order to adjust the normal brake calliper clearance before starting the bike.
- Never apply extreme braking during first 150-200 brake applications to achieve sufficient pad/disc surface contact .
After this running-in procedure, the brake pads may be normally use.